> For the complete documentation index, see [llms.txt](https://rda-workshop.gitbook.io/1/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://rda-workshop.gitbook.io/1/laser-cutting/laser-cutting-faq.md).

# Laser Cutting FAQ

<figure><img src="/files/1BhtCuQwAWtPpTMAgyyU" alt="" width="563"><figcaption></figcaption></figure>

<h2 align="center">LASER CUTTER BOOKING LINK</h2>

<h2 align="center"> <strong>⬇</strong></h2>

{% embed url="<https://tinyurl.com/mve3vz2b>" %}

<figure><img src="/files/ox7Ao5dUjnehKFxBwMdk" alt="Scan QR code for acces to booking system" width="216"><figcaption></figcaption></figure>

* Opening hours: **9:00–19:00 monday to friday** via booking. Click link above.
* There are three laser cutters in the workshop with an work area of 1300 x 900 mm and can cut up to 6 mm thick materials. The Bodor lasers are for both HDF, Plywood and cardboard and the Nova laser cutter is **ONLY** for cardboard.
* The laser cutters costs 0,5 DKK per minute, and you can buy 10 and 30 minute tokens for the machines in the metal workshop.

  <figure><img src="/files/21M9E6CsI4X1mUHtMvvP" alt="" width="375"><figcaption></figcaption></figure>
* You must book a timeslot to use the laser cutters, and the room only unlocks with your student ID card if a booking exists. Each booking is 30 minutes.
* The workshop is unstaffed, so students must clean up after themselves and leave the space tidy for the next user. You may NOT give your booking or student ID card to someone else—cancel it instead to avoid waitlists.
* Only **wood** may be laser cut. HDF sheets (2-4 mm) can be purchased at the metal workshop (Building H) and MDF or plywood can be purchased at the wood Workshop (Building H).
* You can read about the machines and their operation in the attached laser cutter manuals in the workshop or here on the website.